Dragon Hotend - High-Flow
Content: 1 pcs
|Dimensions||6.1 × 8.1 × 3.4 cm|
- Original Dragon Hotend by Phaetus
- Version V1.1 (official name of the so called V2.0)
- No ODM
Product Box content:
- Dragon High-Flow Hotend
- Silicone Sock
- 0,4/1,75mm Nozzle – copper plated
- Hex key 2,0
- Hex key 1,27
- Hex key 1,5
- open-ended wrench 7,8
Do not install the nozzle with too much force! It might damage the heat break. Officially 2.5Mn are recommended by Phaetus for HOT tightening.
Damaging the heat break or heat sink while installing the Nozzle is not considered to be a warranty case! If you disagree, please consider purchasing elsewhere.